Payment & Shipping Terms:
|Casing Materail:||Stainless Steel 304||Principle:||Piston|
|Quick-wear Part:||Piston, Seal, Spring||Provide Production:||Standards And Customization|
|Position:||Vertical Drum Pump||Seal Material:||Rubber Seal|
|Working Condition:||Continuous||Working Environment:||Outdoor Or Indoor|
|Gas Source Pressure:||3~8 Bar||Capacity:||0~18 L/min|
High Pressure Plunger Pump Centrifugal Sewage Pump Vertical Drum Pump Chemical Drum Pump
The RB high pressure pneumatic slurry drum pump is driven by a pneumatic motor. The air plunger makes reciprocating motion to drive open and off of guiding plunger, so as to transfer fluid. By adjusting the air strength, the flowrate of fluid is adjustable. It also may be equiped with air sensor element to make automatic system.Control the flow and pressure of the supplying gas to control and regulate the pump's feed flow rate. Combined with the inductive switch to make it work automatically.
It is suitable for the transportation of chemical slurry with high viscosity of 120,000 cps/25 degrees Celsius. It is also suitable for the transportation of viscous liquid, corrosive liquid, liquid containing solid particles or bubbles. At the same time, it has the functions of explosion-proof, anti-corrosion, low noise and energy-saving. The pump head is made of aluminium alloy and the pump pipe is made of stainless steel. The seal of the pump is made of fluoroplastics, which is corrosion resistant and high temperature resistant. The standard length of the pump pipe is 880 mm, and the length of the pump pipe can be customized (270 ~ 940 mm).
1. It is used in printing, leather, color-coated, and chemicals, dyeing, coatings, painting, pharmaceuticals, textiles, etc.
2. It is an ideal pump for epoxy, resin, glue, paint, fruit juice, shampoo, lubricating oil, gear oil, grease, glycerin, honey, printing ink, etc.
|Air Pressure Ratio:||2:1||3:1||5:1|
|Pump Head:||Aluminum alloy|
|Pump Tube:||Stainless steel|
|Gas Source Pressure(Bar):||3~8 Bar|
|Air consumption(L/min):||0~250 L/min|
|Suction Tube Diameter(mm):||42 mm|
|Tube Length(mm):||880 mm|
|Air inlet Diameter(inch):||G¼" inch|
|Outlet Diameter(inch):||G½" inch|
|Max. Viscosity(SAE):||240 SAE|
|Working Temperature(℃):||-10~+50 ℃|
|Suitable Oil Drum(L):||180~220 L|