Payment & Shipping Terms:
|Water Consumption:||2~20L/min||Caliber:||1inch ~3inch|
|Connection Mode:||Thread, Flange||Customized Service:||Available|
|Port:||Ningbo, Shanghai||Power:||1.1~15kw, 220/380/415/440v 3phase|
2BV Monoblock Single Stage Water Ring Vacuum Pump Small Circulating Water Air Pump
The 2BV type single-stage water ring vacuum pump is a multi-function pump which is suitable for removing gas and water vapor, other gases which is non-corrosive, insoluble in water, and free of solid particles. Suction pressure can reach 33mbar absolute pressure (97% vacuum); When the vacuum pump suction pressure is less than 80 mbar at work for a long time, cavitation protection tube should be connected to the pump to protect the pump. If works together with equipment such as air injector, inspiratory pressure can reach 10 mbar, injector can be directly installed on the vacuum pump. When used as a compressor, the pressure is as high as 0.26mbar (absolute pressure).
1. Pump body material: cast iron;
2. Ultimate vacuum: 33mbar (-0.099Mpa);
3. The exhaust volume range is 0.45~8.33m3/min;
4.2 bv-type water ring vacuum pump is a single-stage pump with the same shaft as the whole structure. Shaft seal is mechanical seal.
5. Pump should be supplied with water continuously by the reason of water loss together with air exhausted and heat generated by processing.
6. It has the characteristics of high vacuum, high pumping speed in high vacuum zone, compact structure, reliable operation and convenient maintenance.
7. When 2BV water ring type vacuum pump used as a compressor, pump outlet is equipped with water gas separator. The gas and water mixture will be separated and the water will go back to pump body automatically. And gas from the exhaust pipe goes to the required system. When compressed gas, the water supply pipe should be continuously supplied with cold water to make sure perfect performance of pump (compressor).
Widely used in food industry, textile industry, medicine industry, chemical industry ir other industries.