Payment & Shipping Terms:
|Cacapity:||30 ~ 100L/min||Pressure:||3bar|
|Motor Power:||370w~ 1100w||Motor Voltage:||110/220v 1phase, 220/380/415/440v 3phase|
|Material:||Cast Iron, Stainless Steel||Max. Liquid Temperature:||80°C|
|Max. Viscosity:||300cst||OEM Service:||Available|
WCB Portable Oil Transfer Pump CI SS Gear Pump With Handle For Oil Depot / Oil Refinery
WCB gear pump is a low pressure portable oil transfer pump. The bearing has been insulated from the liquid, and is lubricated alone. The gears are made of alloy steel and has passed special heat treatment. The surface hardness of gear could be more than HRC60, which means the strong ability of wear-resisting. It is a typical soap pump, and compared with normal gear oil pump, it’s more applicable to deliver the liquids that is non-lubricated, poor lubricated or liquid with sub-particles.
1. Wide used in oil refinery, power plant, electric power substation, oil depot and oil lubricating system. If you need to deliver non-lubricating oil, drink, low corrosive water, etc, please use stainless steel type.
2. The oil should be neutral (such as kerosene, diesel oil, mineral oil or vegetable oil ), lubricated, non-corrosive, non-particles and non-fiber, the temperature should be ≤ 80℃, viscosity should be 5-1500cSt.
3. Gears are with high hardness and strong strength, and are installed in shaft sleeve with axle, which are easy to replace.
4. It is with unloading tank and return chute, which have minimized the torque force of gear and brought small bearing load, small wearing and high efficiency to pump.
5. It has been installed a relief valve to prevent pump from overload. The full reflux pressure of the relief valve is 1.5 times of rated pressure. And within allowable discharge pressure, it’s adjustable. In addition, the relief valve cannot work as pressure reducing valve for long time. Please install a pressure reducing valve if you need.
Petrochemical industry: light oil, diesel, kerosene, aviation kerosene.
Daily-use chemical industry: sorbitol, fatty alcohol, shampoo, dishwashing liquid, body wash, toothpaste, washing powder slurry.
Fine chemical industry: fuel, pigment, various slurry, auxiliary chemicals, leather auxiliaries, silicone oil, suspension, various kinds of colloid material, etc.
Coating: paint, dope, printing ink, insulation varnish, auxiliaries, organic solvent, etc.